Non Slip Coating – Solvent Base
Metal Epoxy Coating (premixed) with Grit
Your Coverage Per Square Foot Matters!
Non-Skid Paint offers 2-3 times more coverage.
Equals 2-3 times more in savings for your project!
Non-Slip Coating – Maximum Coverage
- Qty. 1 Non-Skid Paint Spray Can – 15-25 Square Feet
- Qty. 1 Non-Skid Paint Quart – 50-70 Square Feet
- Qty. 1 Non-Skid Paint Gallon – 200-400 Square Feet
- Qty. 1 Non-Skid Paint 5 Gallon Pail – 1000-1500 Square Feet
We have all experienced the anxiety and strong feeling of fear when you slip and fall on a wet surface. And in the worst case you can really hurt yourself. Let me tell you that is a feeling you do not want to experience ever again!
Our Non Slip Coating will eliminate your slippery surface and provide you with the safety, security, sure footing, and peace of mind you deserve and expect.
Easy do-it-yourself non skid paint instead of carpet for aluminum boat, jon boat, catfish rig, bass boat, waterfowl boat, duck boat, river boat, pontoon boat, house boat, canoe, and kayak.
Aluminum Non Slip Epoxy Coating (premixed) with Grit. For Metal Truck Bed, Aluminum Ramp, Bumper, Step, Tool Box, or Lift Gate. Providing a flexible, durable, hard textured non slip surface. Quick dry and easy to apply non slip coating for dry or wet slippery surface. For your drivers safety and help reduce workman’s comp claims.
- Best Coverage: Non-Slip Coating #200-400 square feet per gallon.
- Competitor’s Coverage: Only #100-125 square feet per gallon.
- Super Cost Savings: That’s more than 50% less per square foot, you decide!
Non-Slip Coating for Aluminum and Metal Diamond Plate
Easy to Apply * Quick Dry * Sure Grip * Traction
Save Big Time on your annual insurance costs with a facility Safety First Policy!
Businesses must maintain their floors in slip-resistant condition or face fines up to $50,000 for first offense and up to $100,000 for a second offense. The Americans with Disabilities Act recognizes the importance of maintaining non slip floors and stair treads.
Business owners, municipalities, manufactures, and property owners everywhere know how costly a slip and fall accident can be. They know sooner or later they will have an encounter with a slip and fall accident resulting in injury and possibly a lawsuit.
Lower Insurance Cost
The application of non-slip coating can significantly reduce damage awards in slip and fall lawsuits because the claimant cannot accuse the property owner of negligence. All the while benefits include less insurance claims, lower property insurance and workers compensation insurance.
Non Slip Paint for Boats – Application Instruction
Non Slip Coating Colors in Stock:
BLACK, SHIPSTONE GRAY, SAFETY YELLOW
Non-Slip Coating Special Order Colors:
CLEAR, POLAR WHITE, BLUE, HATTERAS OFF-WHITE, SEQUOIA GREEN, RUSSET RED, UMBER BROWN, OSHA ORANGE, CHAMOIS BEIGE, BUTTERNUT
Non Slip Coating Color Changes:
It is recommended to use Non Slip Coating in Polar White to add too another color to achieve a lighter shade in that same color. For color consistency use a 1 to 1 ratio (Example: for every 1 gallon of chosen color add 1 quart of Polar White).
Non-Skid Coating Coverage:
#200-400 SQUARE FEET PER GALLON @ 4 MILS WET = 1.5 MILS DRY – A two-coat application is recommended for most surfaces, and easy to apply with a brush or 3/8″ inch (low nap) roller.
Non Skid Coating Curing Time:
Temperature and Humidity Dependent (Apply in temperatures between 50 to 90 degrees *F)
Non-Skid Coating Drying Time:
@ 77 DEGREES *F with 50% RELATIVE HUMIDITY
(Avoid painting late in the day when condensation is likely or if rain is forecasted)
TO THE TOUCH………………………………………30 – 40 Minutes TACK FREE
RECOAT or TOPCOAT…………..…………..……………………………2 – 3 HOURS
DRY HARD…………..………………..……………………………………….72 HOURS
FULL CURE………..…………….…….……………………………………..5 – 7 DAYS
CLEAN UP INFORMATION:
CLEAN HANDS AND TOOLS IMMEDIATELY WITH SOAP AND WARM WATER.
Helpful Tips & Frequently Asked Questions!
DO NOT USE:
On garage floors or other areas where vehicles are parked OR on smooth glossy surfaces such as porcelain.
DO NOT USE:
In areas where there is standing water or where ponding occurs, these areas must be leveled for proper drainage prior to use of Non Skid Paint. For bottom of boat use Non-Slip Coating (solvent base).
HOW DO I CLEAN THE AREA PRIOR TO PAINTING?
For Gelcoat and Fiberglass use Acetone. For Non-Ferrous Metals and Aluminum use a Industrial Degreaser and aluminum acid-etch preparation. On Concrete use Trisodium Phosphate (TSP), use a firm bristle brush and rinse off thoroughly with clean water. Area must be completely dry before application. If necessary, use a heat source such as a large Hot Air Floor Dryer. These products are available through most Hardware Stores.
Do I need to add Monster Grit Pumice Additive?
NO, Non Slip Coating comes (premixed) with Grit. Extra Grit Additive is recommended for applications such as Incline Ramps.
Why do I need to stir Non Slip Coating so thoroughly and not just shake it up real good?
The Pumice Grit material in Non Slip Coating settles to the top of can, and sometimes sticks to the lid. This is because the Grit is lighter than the Epoxy and will stay suspended and not sink to the bottom of can after thoroughly mixed. It is best to scrap any Grit that is stuck to the lid back into the paint with a wood stir-stick; so as to not lose the designed textured surface. Mix well before and during application.
How do I clean Non Slip Coating off my hands and tools?
Non Slip Coating is environmentally safe to use, easily clean hands and tools with warm soapy water immediately after application.
How long will it last before I need to topcoat?
It is recommended that on high traffic area’s you topcoat once every 1-2 years as needed. Area’s that have low to medium traffic you can topcoat once every 2-3 years as needed.
What’s the best way to keep Non Slip Coating clean?
Clean Non Slip Coating with warm water mixed with any mild soap or detergent. Use a firm bristle brush and rinse off thoroughly with clean water.
Do I need to apply a primer?
Non Slip Coating is self-priming on most surfaces. On wood substrates use a exterior oil base or latex wood primer. For metal surfaces apply an exterior metal primer over clean, dry metal. This will also provide additional rust prevention.
Because application and conditions vary, and are beyond our control, we are not responsible for results obtained in using this product, even when used as suggested. The user should conduct tests to determine the suitability of the product for the intended use, (including liability for breach of warranty, strict liability in tort, negligence or otherwise) is limited exclusively to replacement of the product or refund of its price. Under no circumstance are we liable for incidental and consequential damages.