Non-Skid Paint – Quart

Non-Skid Paint Colors In Stock:
SHIPSTONE GRAY, CHAMOIS BEIGE,  POLAR WHITE, BLACK, HATTERAS OFF-WHITE, OSHA YELLOW, BLUE, BUTTERNUT, and CLEAR

Non Skid Paint Special Order Colors:
SEQUOIA GREEN, RUSSET RED, UMBER BROWN, OSHA ORANGE

Non-Slip Paint Color Changes:
It is recommended to use Non Skid Paint in Polar White to add too another color to achieve a lighter shade in that same color. For color consistency use a 1 to 1 ratio (Example: for every 1 gallon of chosen color add 1 quart of Polar White).

Non-Skid Paint Coverage:
#200-400 SQUARE FEET PER GALLON @ 4 MILS WET = 1.5 MILS DRY – A two-coat application is recommended for most surfaces, and easy to apply with a brush or 3/8″ inch (low nap) roller.

Non Slip Paint Curing Time:
Temperature and Humidity Dependent (Apply in temperatures between 50 to 90 degrees *F)

Non-Skid Paint Drying Time:
@ 77 DEGREES *F with 50% RELATIVE HUMIDITY
(Avoid painting late in the day when condensation is likely or if rain is forecasted)

TO THE TOUCH………………………………………30 – 40 Minutes TACK FREE
RECOAT or TOPCOAT…………..…………..……………………………2 – 3 HOURS
DRY HARD…………..………………..……………………………………….72 HOURS
FULL CURE………..…………….…….……………………………………..5 – 7 DAYS
NONSKID CLEAN UP INFORMATION:
CLEAN HANDS AND TOOLS IMMEDIATELY WITH SOAP AND WARM WATER.

NonSkid Helpful Tips & Frequently Asked Questions!

DO NOT USE:

On garage floors or other areas where vehicles are parked OR on smooth glossy surfaces such as porcelain.

DO NOT USE:

In areas where standing water or ponding occurs, these areas must be leveled for proper drainage prior to use of Non Skid Deck Paint. * Use our Non Slip Coating (Solvent Base) for bottom of boat were ponding water occurs.

HOW DO I CLEAN THE AREA PRIOR TO PAINTING?
For Gelcoat and Fiberglass use Acetone. For Non-Ferrous Metals use a Industrial Degreaser,  Aluminum use a aluminum metal-etch treatment and preparation. On Concrete use Trisodium Phosphate (TSP), use a firm bristle brush and rinse off thoroughly with clean water. Area must be completely dry before application. If necessary, use a heat source such as a large Hot Air Floor Dryer. These products are available through most Hardware Stores.

Do I need to add Monster Grit Extra Texture Additive?
NO, Non Skid Deck Paint comes (premixed) with Grit. Extra Grit Additive is recommended for applications such as Incline Ramps and Stair Treads.

Can I use any kind of thinner?
NO, Non Skid Deck Paint is a Water Reducible Epoxy-Ester Coating and can only be thinned with water. Add no more than ½ quart of water per gallon for top coat only. (NOTE: Base coat must be applied directly from pail without thinning)

Why do I need to stir Non Skid Deck Paint so thoroughly and not just shake it up real good?
The Pumice Grit material in Non Slip Deck Paint settles to the top of can, and sometimes sticks to the lid. This is because the Grit is lighter than the Epoxy and will stay suspended and not sink to the bottom of can after thoroughly mixed. It is best to scrap any Grit that is stuck to the lid back into the paint with a wood stir-stick; so as to not lose the designed textured surface. Mix well before and during application.

How do I clean Non Skid Deck Paint off my hands and tools?
Non Skid Deck Paint is environmentally safe to use, easily clean hands and tools with warm soapy water immediately after application.

How long will it last before I need to topcoat?
It is recommended that on high traffic area’s you topcoat once every 1-2 years as needed. Area’s that have low to medium traffic you can topcoat once every 2-3 years as needed.

What’s the best way to keep Non Skid Deck Paint clean?
Clean NonSkid Deck Paint with warm water mixed with any mild soap or detergent. Use a firm bristle brush and rinse off thoroughly with clean water.

Do I need to apply a primer?
Non Skid Deck Paint is self-priming on most surfaces. On wood substrates use a exterior oil base or latex wood primer. For metal surfaces apply an exterior metal primer over clean, dry metal. This will also provide additional rust prevention.

LIMITATIONS
Because application and conditions vary, and are beyond our control, we are not responsible for results obtained in using this product, even when used as suggested. The user should conduct tests to determine the suitability of the product for the intended use, (including liability for breach of warranty, strict liability in tort, negligence or otherwise) is limited exclusively to replacement of the product or refund of its price. Under no circumstance are we liable for incidental and consequential damages.